DOC100/200 | Fixed

IP66, Class I. Class II on request. IK07. Marine-grade, die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG® gasket. Safety glass lens. Two cable entries. Integral EC electronic converter in thermally separated compartment. CAD-optimised optics for superior illumination and glare control. OLC® One LED Concept. Factory installed LED circuit board. The luminaire is factory- sealed and does not need to be opened during the installation. Optional 2200 K version available. To be specified at time of ordering. Suitable for mounting up to max. 40 mm ceiling thickness. A pre-installation blockout, proud or flush, is available and recommended for mounting in concrete ceilings. To be ordered separately. The luminaire is not suitable for chlorine containing environments e.g. swimming pool. Special version suitable for chlorine containing environments, on request. Must be specified at time of ordering.

Colors

RAL9004 Signal black

RAL9006 White aluminium

RAL9007 Grey aluminium

RAL7016 Anthracite grey

RAL9016 Traffic white

RAL8019 Grey brown

Powdercoat finish available in 35 different colours

RAL9016 Traffic white

Material

Body	Marine-grade, die-cast aluminium alloy
Fasteners	PCS Polymer Coated Stainless Steel Hardware
Gasket	Silicone CCG® Controlled Compression Gasket
Impact Protection	IK07
Ingress Protection	IP66
Finish	Powdercoat finish in RAL7016, RAL9004, RAL9006, RAL9007 and RAL9016
Corrosion Protection	5CE
Mounting	Suitable for mounting up to max. 40 mm ceiling thickness. A pre-installation blockout, proud or flush, is available and recommended for mounting in concrete ceilings. To be ordered separately.

Electrical

Ballast / Driver	Standard. Optional DALI version available. To be specified at time of ordering.
Cable	Two cable entries
Power Factor
Power Supply	220-240V / 50-60 Hz
Surge Protection	1/2 kV

Additional Information

Lifetime	Ta=25° L90B10 > 90000h
Energy efficiency class	C-D (Light source)

Light Distribution

Delivered Lumen

Wattage

Colour Temperature

Part-ID	Light Distribution	Light Source	Lumen	CRI	Open Data	PDF	IES, LDT, ULD
134-1625	symmetric, wide beam [B]	LED-6/12W / 700 mA - 3000 K	1347.1	80
134-1626	symmetric, wide beam [B]	LED-6/12W / 700 mA - 4000 K	1440	80
134-1627	symmetric, medium beam [M]	LED-6/12W / 700 mA - 3000 K	1511.8	80
134-1628	symmetric, medium beam [M]	LED-6/12W / 700 mA - 4000 K	1616.1	80
134-1631	symmetric, very narrow beam [EE]	LED-6/12W / 700 mA - 3000 K	1496.5	80
134-1632	symmetric, very narrow beam [EE]	LED-6/12W / 700 mA - 4000 K	1599.7	80
134-1633	symmetric, very narrow beam, sharp cut-off [EES]	LED-6/12W / 700 mA - 3000 K	1610.7	80
134-1634	symmetric, very narrow beam, sharp cut-off [EES]	LED-6/12W / 700 mA - 4000 K	1721.8	80
134-1627	wallwash [A20]	LED-6/12W / 700 mA - 3000 K	1142.4	80
134-1628	wallwash [A20]	LED-6/12W / 700 mA - 4000 K	1221.2	80
134-1631	linear spread, very narrow beam [EE]	LED-6/12W / 700 mA - 3000 K	1386.3	80
134-1632	linear spread, very narrow beam [EE]	LED-6/12W / 700 mA - 4000 K	1481.9	80
134-1633	linear spread, very narrow beam, sharp cut-off [EES]	LED-6/12W / 700 mA - 3000 K	1526.2	80
134-1634	linear spread, very narrow beam, sharp cut-off [EES]	LED-6/12W / 700 mA - 4000 K	1631.5	80
134-1907	symmetric, wide beam [B]	LED-6/12W / 700 mA - 2700 K	1254.2	80
134-1908	symmetric, medium beam [M]	LED-6/12W / 700 mA - 2700 K	1407.5	80
134-1909	symmetric, very narrow beam [EE]	LED-6/12W / 700 mA - 2700 K	1393.3	80
134-1910	symmetric, very narrow beam, sharp cut-off [EES]	LED-6/12W / 700 mA - 2700 K	1499.6	80
134-1908	wallwash [A20]	LED-6/12W / 700 mA - 2700 K	1063.6	80