Eco Step Dim® Motion

Eco Step Dim® Motion – for an appropriate lighting level Less light pollution, lower energy consumption, less impact on the environment – Eco Step Dim® Motion, the wireless solution for presence-dependent lighting control, is now also available for the CTY100, KTY200, ZFY200 and CFY200 bollards from WE-EF. Do bollards always need to produce the same […]

Eco Step Dim® Motion

Eco Step Dim® Motion – for an appropriate lighting level

Less light pollution, lower energy consumption, less impact on the environment – Eco Step Dim® Motion, the wireless solution for presence-dependent lighting control, is now also available for the CTY100, KTY200, ZFY200 and CFY200 bollards from WE-EF.

Do bollards always need to produce the same bright lighting level to illuminate public parks, open spaces and terraces or private gardens, driveways and forecourts? The answer is: no, they don’t. However, when people use these areas, they should feel safe and be able to see well.

Eco Step Dim® Motion uses PIR (passive infrared) sensors to capture motion data. If presence is detected, the lighting level is increased from a programmed, reduced lighting level to a predefined level, e.g., to 100%. This setting is kept for a fixed time and for as long as people are moving around in the area. When presence is no longer detected, the luminaires are automatically dimmed. This enables optimum visual conditions for the users to be combined with the greatest possible protection of the environment.

The technology for this is housed in a compact box fitted in the bollard housing where it is protected from vandalism. Depending on the usage scenario, the luminaires can be operated either as a stand-alone variant, each with their own motion sensor independent of the neighbouring luminaires, or they can be networked as a group. The Secondary version is a cost-effective solution; here, only the first and the last luminaire in a row are equipped with a motion detector.

Eco Step Dim® Motion Stand-Alone – Each luminaire has a motion detector that detects and reacts independently of its neighbours. This allows wider spacing between luminaires for maximum energy savings.
EEco Step Dim® Motion Linked-Primary – Each luminaire has a motion detector. The luminaires are interconnected and are switched on when motion is detected via the additional control phase. Ideal for high security areas.
Eco Step Dim® Motion Linked-Secondary – Only the first and the last luminaire have an integrated motion detector. These will trigger all the connected luminaires via the additional control phase in each junction box. Cost-effective solution for medium security needs.

Loading products...