Airport Berlin Brandenburg

Airport Berlin Brandenburg

TAILOR-MADE LIGHT COLUMNS FOR WILLY-BRANDT-PLATZ AT THE NEW BER AIRPORT

Willy-Brandt-Platz, in front of Terminal 1, is the architectural centre of the new Berlin Brandenburg Airport. In 2015, the long construction period necessitated a new approach to the forecourt lighting due to changed requirements and regulations. The lighting design office, Licht Kunst Licht, developed an impressive concept – the approximately 14,000 square metres of the vast forecourt are fully illuminated, but without seeming sterile thanks to a soft progression in the levels of brightness. This is achieved by two rows of lighting, each consisting of four 16-metre-high light columns around the edges of the new forecourt.

A project of this size cannot be realised with “off the peg” products. The planners’ idea of integrating the entire lighting technology into the slender columns also posed a challenge for WE-EF. The columns are made of a single piece of hot-dip galvanized steel tube and have been given a project-specific special coating in the colour “DB703 micaceous iron ore”. The tube diameter of 300 mm has enough room for the compact FLC141 LED projectors, which are mounted in pairs and one above the other with special fastening pins in a tube cut-out. The openings have flush acrylic glass covers and are axially offset to allow the projectors to be optimally aligned. The top three cut-outs are used for general lighting, while the bottom two provide emergency lighting for the area that is used as an assembly point for the terminal in the event of an emergency.

Different light distributions are used for the differentiated illumination of the forecourt. The traffic zones at the edge are accentuated and the illuminance decreases continuously towards the centre of the square. Furthermore, wide-beam optics illuminate the areas at the edges and very narrow-beam optics beam light over the square. The emergency lighting combines wide-beam and medium-beam light distributions to meet the requirements related to illuminance and uniformity.

During an on-site trialling procedure a lifting platform conveyed a tube section fitted with projectors to the planned mounting height as a mock-up to gain realistic visual impressions and measuring values. While the light columns were anchored in the normal way (like floodlight masts) with flanges bolted to concrete foundations, other logistical aspects were quite different to standard processes. For example, WE-EF employees fitted the projectors and the electrics in the light columns directly on site before they were subsequently installed in their respective positions. Although the lighting of Willy-Brandt-Platz is just one aspect of the whole BER project, it is the first impression for many users and visitors – and it shows how even exceptional challenges can be mastered with intelligent planning and professional partners.

Project: Willy-Brandt-Platz, Flughafen Berlin Brandenburg BER, 12529 Schönefeld
Principal: Flughafen Berlin Brandenburg GmbH, Berlin
Architects: gmp, Hamburg
Landscape planning: WES LandschaftsArchitektur Berlin
Light planning: Light Kunst Light AG, Berlin
Photos: Frieder Blickle for WE-EF

Loading products...